TRAY & POWER CABLES

TRAY CABLEXHHW-2 or RW90/EnviroPlus® 50% Ground600/1,000 Volt Copper, LSZH Jacket3 Conductor, Factory Mutual Group 1

Resources

Description

Three copper conductors, stranded and insulated with heat and moisture resistant, chemically crosslinked polyethylene (type XHHW-2 or RW90), phase identified and cabled together with fillers (when necessary) and three bare copper ground conductors. Cable core is covered with binder tape and overall black low smoke, zero halogen, lead-free jacket.
Available with tinned conductors.

Application

Suitable for use in hazardous locations: Class I - Div 2, Class II - Div 2.

Standards

UL1277
CSA C22.2 #230 TC
ICEA S-95-658/NEMA WC-70
Exposed Runs Rated (TC-ER)
IMSA 19-1 (K-1 Colors)
Flame Rated: IEEE 383 (70,000 BTU), IEEE 1202/CSA FT-4,
UL1685 and UL 1581, Two-hour Firewall
Temperature Rated at 90°C Wet/Dry, Cold Temperature Rated at -40°C
Sunlight Resistant
Direct Burial
Color Code: Black and Numbered (optional color codes available)
Low Smoke, Zero Halogen Jacket
RoHS Compliant

Request QuoteDownload Spec Sheet

VIEW PRODUCT DATA TABLE
Part Number	Size ^{(AWG or Kcmil)}	Strand ^(no.)	Insulation Thickness ^(mils)	Grounding Conductors ^(AWG)	Jacket Thickness ^(mils)	Approx. Diameter Overall ^(in.)	Approx. Net Weight ^(lb/1000')	Ampacity* ^{(30°C ambient) 90°C Wet/Dry}
TCNH8/3G3#14	8	7	45	(3) #14	60	0.66	311	55
TCNH6/3G3#12	6	7	45	(3) #12	60	0.74	466	75
TCNH4/3G3#10	4	7	45	(3) #10	80	0.89	717	95
TCNH2/3G3#8	2	7	45	(3) #8	80	1.00	1,050	130
TCNH1/3G3#8	1	19	55	(3) #8	80	1.11	1,271	145
TCNH1/03G3#6	1/0	19	55	(3) #6	80	1.20	1,610	170
TCNH2/03G3#6	2/0	19	55	(3) #6	80	1.30	1,918	195
TCNH3/03G3#4	3/0	19	55	(3) #4	80	1.40	2,432	225
TCNH4/03G3#4	4/0	19	55	(3) #4	80	1.53	2,914	260
TCNH250/3G3#4	250	37	65	(3) #4	80	1.64	3,322	290
TCNH350/3G3#2	350	37	65	(3) #2	110	1.92	4,713	350
TCNH500/3G3#1	500	37	65	(3) #1	110	2.19	6,461	430
*Per NEC Table 310.15 (B)(16). Four-conductor ampacity assumes three are hot and one is neutral. NOTE: The data shown is approximate and subject to standard industry tolerances.