Armor Cables
Teck Armor
600 Volt/UL Type MC
Inner/Outer Jacket
Copper XHHW-2
Description: Class B stranded copper, insulated with heat and moisture resistant cross-linked polyethylene (type XHHW-2), phase identified, cabled with **bare copper ground conductor. Cable core covered with binder tape, an inner PVC jacket, aluminum interlocked armor and an outer PVC jacket.
Standards:
UL 1569
Flame Rated: IEEE-383 (70,000 BTU),
ICEA T-29-520 (210,000 BTU), / FT4 Flame Test
IEEE 1202/CSA FT-4
Two-hour Firewall rated
Sunlight Resistant for CT Use; Direct Burial1,
Oil Resistant II Jacket
Color Code K-2/other color codes available
Temperature rating at 90° C Wet/Dry
ICEA S-95-658/NEMA WC-70
Features: Teck cable is suitable for use in exposed or concealed wiring in dry or wet locations, in ventilated or ladder type cable trays in dry or wet conditions, on walls or beams, or directly buried. Suitable for use in NEC Hazardous locations: Class I, Div. 2 and Class II, Div. 2.
Teck Armor - Power Sizes
600 Volt/UL Type MC
Inner/Outer Jacket
Copper XHHW-2
Description: Stranded copper, insulated with heat and moisture resistant crosslinked polyethylene (type XHHW-2), phase identified, cabled with bare copper ground conductor(s). Cable core covered with binder
tape, an inner PVC jacket, aluminum interlocked armor and an outer PVC jacket.
Standards:
UL 1569
Flame Rated: IEEE-383 (70,000 BTU),
ICEA T-29-520 (210,000 BTU),
IEEE 1202/CSA FT-4
Two-hour Firewall rated, (2/0 AWG and smaller)
Sunlight Resistant for CT Use; Direct Burial1,
Oil Resistant II Jacket
Color Code Black and Numbered / other color codes available
Temperature rating at 90° C Wet/Dry
ICEA S-95-658/NEMA WC-70
Features: Teck cable is suitable for use in exposed or concealed wiring in dry or wet locations, in ventilated or ladder type cable trays in dry or wet conditions, on walls or beams, directly buried. Suitable for use in NEC Hazardous locations: Class I, Div. 2 and Class II Div. 2.
UL Listed Connectors
Water Tight
For Interlocked Armor Cable
with Jacket
Description: These U.L. listed connectors are a one-piece body construction with a unique scroll design that can provide a 360 degree ground to armor.
This connector provides a fast and easy installation, eliminates internal components, prevents cable pullout and saves time and labor.
Listings:
UL: Class I* Group A, B, C and D
Class II* Group E, F and G
Class III
* Includes Division 1 and Division 2
Construction:
Suitable for industrial and commercial use.
Manufactured from 6061 copper-free aluminum.
A complete range of NPT (National Pipe Thread) sizes are available
from 1/2" through 4". This accommodates armored cable type MC
O.D. sizes from 0.38 - 4.33".
|
